GENBOX-L Archives

Archiver > GENBOX > 2005-02 > 1107881490


From: "William T. Flight" <>
Subject: RE: [GENBOX] Chart Background (fixed)
Date: Tue, 8 Feb 2005 11:51:30 -0500
In-Reply-To: <001b01c4fe6a$96c8ff80$0800a8c0@SUSY>


Hi Alan,

The white bands that appear on the right and bottom edges of a stretched,
framed chart background image have been removed in the next version.

Thanks for reporting the problem.

--Bill

William T. Flight
http://www.thoughtfulcreations.com

> -----Original Message-----
> From: Cuddlybear [mailto:]
> Sent: Wednesday, January 19, 2005 4:05 PM
> To:
> Subject: Fw: [GENBOX] Chart Background
>
> Hi
> A bit more info. on this chart problem. If I change to
> straight on all sides
> and remove Corner & Margin, cancel inner frame the background
> fills the
> frame. As soon as I put a corner dim. into the setup the
> background fills up
> to the start of the corner radius horizontally & vertically.
> This leaves a
> white band on the right side and bottom edge of the frame.
> Any thoughts?
> Cheers
> Alan
>
> ----- Original Message -----
> From: "Cuddlybear" <>
> To: <>
> Sent: Tuesday, January 18, 2005 10:30 PM
> Subject: [GENBOX] Chart Background
>
>
> > Hi
> > I have made a .jpg image, far larger than any chart I've
> made to date, of
> a background I would like to use in my chart. I have entered
> the path in
> Format and I'm using chart frame "Inset round" for both inner
> & outer frame.
> When I produce the chart the background fits snugly into the
> top LH inner
> corner of the frame, around the inset round border. However
> the background
> doesn't fill the whole inner frame. I've tried using
> "Stretch" but it made
> no difference. How can I achieve the "fully fitted" background?
> > Cheers
> > Alan



This thread: